Get now 10% off! Use Code Flat10

Ghost Immobiliser Installation

Secure your prized possessions from thieves by adding an immobiliser ghost. Our TASSA-certified system guards against key cloning, hacking, and vehicle immobiliser bypass.

The system is hidden in the wiring loom in your vehicle, so it is completely invisible to anyone who looks. It works by creating the pin code push sequence through buttons already on the steering wheel doors, door cards and the centre console.

No circuit cuts

A car is a valuable item that takes years of hard work to obtain, which is why car owners would want to secure their car from theft. Traditional security devices, like alarms or wheel locks, are easily manipulated by thieves. A ghost immobiliser, on the other hand, is a highly effective solution that operates in a quiet manner and is not easily recognized by modern day thieves.

A ghost immobiliser is a hidden device that connects to the CAN data network of your vehicle to disable the engine without the use of radio frequencies or key fobs. It communicates with the ECU of your vehicle by using buttons on the steering wheel, dash and door panels. This generates an unique pincode only accessible to you. The code can be changed at any point and can be as long as 20 digits long depending on your preference. It also comes with a safe emergency code you can use in case you forget your PIN.

The ghost immobiliser can also be used to block relay boxes from transferring the signal of your car’s key from within your home, which would unlock the doors and then start the vehicle. It also blocks advanced methods of stealing your vehicle, like OBD port hacking. The device is small, weatherproof and difficult to detect. It’s also hard to alter.

Another advantage of the ghost immobiliser is that it can be fitted to your vehicle without permanent marks. This makes it ideal for people who plan to resell their car in the future. It’s also more efficient and less time-consuming to install than a factory-fitted system.

The Autowatch Ghost, a groundbreaking new generation device, ghost immobilisers stops thefts of cars using contactless technology by connecting to a vehicle’s CAN network and using the existing buttons to generate a unique PIN code. This is a stealthy device that can be put in without wires being cut and doesn’t require any additional key fobs. It is also connected to the original ECU of the vehicle, preventing thieves by stealing it using a new key. This system has been TASSA-verified and can be linked with an International Security Register. Owners will be able to rest easy knowing that their vehicles are protected from theft.

No scanning by RF

If you have invested lots of time and money into the customisation of your vehicle, you’ll want to protect it from theft. Installing an immobiliser is one of the most effective ways to avoid theft. It will prevent your vehicle from starting until you input a unique code. By using the buttons on your steering wheel and dashboard, you can create an up to 20 digits long that is only known by you, ensuring that only you can drive your vehicle. You can also set up a valet or service mode that allows you temporarily to start your car without entering the PIN code. This allows your technician to work on your vehicle without you being present. This feature is great for those who want to save time and simplify their lives.

Ghost immobilisers are next-generation device that connects to your vehicle’s CAN data network, and uses the buttons on the dashboard and steering wheel to programme a personalised PIN code. It is designed to blend in with the vehicle’s design, as it doesn’t emit any noise or LED indicators. It can be installed anywhere on your vehicle without impacting the appearance of your vehicle.

This stealthy system is approved by TASSA and can reduce the cost of insurance. It also has a tracking function that allows you to locate your vehicle even if it has been stolen. This is especially useful for those who own a unique expensive vehicle which you’ve invested many hours customizing.

Autowatch ghost immobiliser cost, in conjunction with the iPhone app allows you to remotely start your car if you have forgotten your PIN or are not able to enter your vehicle. This feature is ideal when you need to go on errands or drop off your kids and do not want to risk having someone else drive your vehicle. This feature is helpful when you need to take your vehicle in for service or repair.

The Ghost has the advantage that it doesn’t transmit or detect radio frequencies and is therefore undetectable by thieves who employ RF scanning and code grabbing techniques. It is also able to protect your car from key cloning and ECU swapping as well as other typical methods of theft from cars.

No key to cloning

Ghost immobilisers are a fantastic option for protecting high-end vehicles and are designed to block key replication. They stop your car from being started without a PIN code being entered with the standard key fob. This makes it very difficult for thieves to steal your vehicle, and may even stop them from trying. This is a particularly good option if you’ve invested a lot of time and money making your vehicle unique or have a unique or expensive model.

These immobilisers are connected to the vehicle’s onboard CAN network and are completely hidden meaning there is no indication of its presence within the vehicle. It is also difficult to detect using radio frequency scanning technology or code grabbing. This means that a criminal will have to spend much longer in order to successfully get your car.

To bypass the system a thief must be aware of the pin code and the location of the ghost car immobiliser. The pin code is exclusive to you and you can alter it as many times as needed. The pin code is easy to remember, but mathematically unattainable for someone else to figure out. The engineer will also provide an emergency PIN code in the event that you forget the pin.

The Ghost CAN Bus immobiliser could be easily mounted anywhere on your vehicle. It can be used with any vehicle and can be fully customized to match your vehicle’s look. It is also extremely cost-effective and simple to use. You can even transfer the device to a different vehicle if you decide to change cars during the lifetime of ownership, as long as the new vehicle is compatible with the.

The CAN bus is compatible with other security features. It could, for instance detect damage to the vehicle and notify the owner. It could also shut down the engine in the event that the car has been tampered with. The system will safeguard your vehicle from hacking as well as key duplicate. It also detects vibrations and contact with the vehicle. It will also notify the owner when the vehicle is moved.

No OBD port hacking

Ghost utilizes a hidden module that is connected to the CAN data network of your vehicle. This will stop thieves from trying to hack into your vehicle to disable your alarm, turn off your key fob, and make new keys. This technology is a significant improvement over the old methods employed by thieves to steal vehicles in the past. The CAN data network ensures that the system won’t be affected by disconnecting or replacing your battery.

The Autowatch Ghost, the first non-detectable CAN bus immobiliser aftermarket worldwide, safeguards against key-cloning, hacking, and replica car theft. It does not use LED indicators or key fobs. Instead, it uses the buttons on your steering wheel, console, and door panels.

Modern thieves employ diagnostics to identify circuit cuts on your vehicle and can bypass immobilisers that require a large amount of wiring or are incorporated into the wiring. The ghost car immobiliser is weatherproof and does not require any additional wiring. It cannot be identified by diagnostic tools that are professional. It can be put in on vehicles equipped with anti-theft devices.

A Ghost immobiliser also has a significant benefit: your vehicle can only be started by someone who knows your PIN code and physically has access to your vehicle. This is a significant benefit over security systems that can be tampered with using simple cable alteration, a screwdriver or the use of an universal remote controller.

You can easily reset your PIN if forget it using the emergency PIN override feature on a computer or mobile phone. This is a great option if you need to start your car when it’s in a garage or at valet parking.

The Autowatch Ghost 2 is the latest generation of the product and is insurance approved by TASSA when installed by one of our authorized installers. It features a QR fingerprint system for specific components to be identified, which allows the return of stolen parts in the event that they are found, and it can be turned into a’service mode’ which allows the engine to start when your vehicle is in a garage, or using a valet parking service however you will need to enter your PIN number to leave the vehicle.

Leave a Reply

Your email address will not be published. Required fields are marked *