Wood Burning Stoves Near Me
Wood stoves can help you reduce your energy bills. They also help with active woodland management that benefits wildlife.
If they are not properly installed and maintained they could release carbon monoxide which poses health risks for the family. To avoid this, search for an EPA-certified wood burning stove stove with modern technology to ensure safety.
A catalytic stove is equipped with a special honeycomb-like catalyst that converts the smoke of wood into carbon dioxide and water. This is a great choice for those who want to cut down on indoor air pollution while saving money. They burn more hot and produce less creosote. They consume less 5kw multi fuel stove; visit this weblink,. However, they are more expensive to operate than non-catalytic models and require regular maintenance of the combustion chamber.
Wood Stoves certified by the EPA
The EPA requires that wood stoves are designed according to specific guidelines that reduce their emissions. In accordance with these guidelines, catalytic stoves must not emit more than 7.5 grams per hour. This is in contrast to 4.1 g/hr for 5kW Multi Fuel Stove a non-catalytic stove. It is important to keep in mind that lower emissions ratings do not necessarily translate into greater heating efficiency.
Sizing and Selection
It is essential that your wood stove is sized to fit the area in which it will be installed. A stove that is not properly sized will not work as intended and could even overheat. A properly sized stove will increase the heat output while cutting emissions. The brochure: Buying an EPA-Certified Wood Stove (PDF 530K) offers a simple method for sizing and selecting the right wood stove.
Non-Catalytic and Catalytic stoves
The first type of wood stove burning stove produced was the non-catalytic stove. They are also referred to as traditional wood burning stoves or open-fire stoves. The primary advantage of the non-catalytic stove is that it doesn’t need an additional combustion to reduce emissions. However, a significant amount of energy wasted is lost as smoke. The smoke from non-catalytic multifuel stoves is contaminated with a toxic substance known as creosote. The catalytic wood heater has helped to alleviate the risk of these issues. The catalytic stove uses catalysts that burn the gases in the smoke to remove the toxic creosote.
Although the catalytic wood stove was designed as a means to reduce toxic emissions however, it isn’t as efficient as the secondary burn system used in the non-catalytic stove. The catalyst does produce some toxic fumes due to the fact that it doesn’t burn completely the byproducts of burning wood fire stove. In addition the honeycomb structure the catalyst may break down over time. This could result in a decrease in performance and a need for replacement.
Cleaning the Combustion Chamber Clean
A functioning catalytic combustor will have an appearance of light gray powdery. It should be free of soot, ash, or any other material that could plug up the catalytic surfaces and decrease their surface area. The combustor should not be exposed to flame impingement. This could be caused by a fast, powerful draft pulling flames directly into the catalytic converter. This may also happen if the firebox door or ash pan door is left open.
It is crucial to examine the catalytic combustion chamber on a regular basis for physical damage or a need to replace. If the catalytic combustor is damaged or needs to be replaced, it must be done as quickly as is feasible to ensure maximum performance.